add share buttonsSoftshare button powered by web designing, website development company in India

Tag: Skylights

The Skylight Installation Procedure

Skylights allow natural light to penetrate the entire roof. Homeowners place them to lower electricity and light prices without strong lighting. The fundamental types of skylights are the frame in place and the curb. The initial variant is installed flush with the roof plane and secured with L-shaped brackets. Curb-mounted skylights rest on curbs on the roof plane. Skylight setup is simpler than installing a window. If you want to install skylight at your home visit Calidad Industries Energy Efficiency Solutions.

Image Source: Google

First steps of the skylight installation procedure

Framing a sturdy opening is the initial step in installing a skylight. A skylight frame set includes three components along a framed curb that are needed for a curb-mounted skylight. Headers are used to frame the ceiling opening and the ceiling opening is framed in an identical method. The structure that joins the roof and the roof openings is known as the shaft. It can be flared or vertical and can be covered and finished.

Skylight evaluation and opening construction

Installing a foam skylight in place involves mounting the L-brackets to the face of the skylight, positioning the skylight from the framed hole, and snapping it into place. A curb must be constructed to obtain a curb-mounted skylight, which must be squared and caulked until the skylight snaps into place and is secured. The shingles are then replaced, leaving room for flashing between their edges and the control.

The sill flashing must be installed first and is typically nailed to the curb and connected to the roof with plastic roofing cement. Next, the side flashing is installed and attached. The bottom of the head flashing slides under the shingles, is placed in addition to the negative flashing, secured in position, and temporary supports are also removed.